Diy Kit In-14 Arduino Shield Ncs314-8c Nixie Clock

DIY KIT for IN-14 Arduino Shield  NCS314-8C 
Nixie Tubes Clock with Sockets
Tubes Columns Arduino Optional
UPS Express delivery high recommended
Economy Shipping slow and unreliable

Project Divergence Meter mini

DIY KIT for Nixie Tubes Clock on IN-14+IN-19A Vintage xUSSR’s Nixie Tubes

KIT designed for Arduino Control board and Shield Tubes board

Designed for 8 IN-14 and 1 IN-19A Nixie Tubes, the most popular Vintage Nixie Tubes in the world

Nixie Tubes Clocks are one of the most beautiful and popular vintage Clocks in the world

Hundreds of thousands of Arduino boards are already fueling people’s creativity all over the world everyday

PCB, Design, Schematics, Case and Software made by GRA & AFCH

 

 

Listing includes:

• Bare PCB NCS314-8C board
• Set of all Electronics and mounting parts and components
• IN-14 Nixie Tubes – 8 pcs + IN-19 Nixie Tubes – 1 pcs (optional, choose in selector)
• NE-2H Neon lamps – 6 pcs
• Columns for Dots – 3 pcs (optional, choose in selector)
• Arduino Control Board UNO or MEGA (optional, choose in selector)
• Accessories (Temp. sensor, GPS Receiver, Remote) (optional, choose in selector) 
• Set of hex spacers and bolts
• List of all Parts and Components on paper
• User manual on vintage-style paper.
• Printed Electrical scheme

 

Base listing contains bare PCB board NCS314-8C, Nixie Tubes and NE2H Neon lamps

 

 

Dear customers!
If you have ANY questions, PLEASE ASK us

Software Features:

• Shield supports IN-14 Nixie tubes – 8 pcs + IN-19 Symbolic Nixie tubes -1pc
• Date format: [DD:MM:YY]; 12/24 hour format: [HH:MM:SS].
• Full static display mode.
• Slot Machine (Anti poisoning – tubes saving function. Increases the service life).
• Temperature measurement [Celsius or Fahrenheit]. Digital temperature sensor (DS18B20, optional  not included).
• GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 V power supply, optional, choose in selector).
• Operation via IR remote control (Remote control Sony RM-X151, optional not included).
• Automatic information refreshing on the tubes.
• The maximum possible brightness of the tubes.
• Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it. Or you have option for a cyclic full spectrum color change!
• As alarm sound clock uses standard RTTTL (Nokia format) melodies, so you can easily change it (included songs: Mission Impossible, We Wish You…).
• Easy updating firmware via USB using Arduino IDE.
• Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end. Unique detailed tube test – our soft check each segment on every lamp. Distinguishable to see segment failure.

Hardware Features:

• Highly accurate RTC (Real Time Clock) DS3231SN with backup battery.
• Integrated high voltage power supply: 150 – 220V.
• High voltage adjusting potentiometer.
• 3 control buttons on board.
• 8 pcs RGB SMD LEDs.
• 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (please check the manual).
• Internal buzzer.
• Test points for testing, adjusting and controlling low and high voltage circuits.
• Plug for optional external GPS receiver  (only with Arduino Mega).
• IR receiver TSOP4836 for optional IR remote controllers (In case of using Arduino UNO, they may conflict with “Tone” library). If you plan to use remote control, we strongly recommend the using of Arduino MEGA – works fluently.
• 3 pin connector for optional Temperature sensor (DS18B20; 1-Wire protocol).
• SPI up to 4Mhz.
• Places for 3 column with 2 neon dots (digits separator).
• Independent controls for upper and lower dots.
• Power consumption: 12V, 760mA. Recommended: 12 VDC, not less than 1A. Power supply connector dimensions: 5.5 x 2.1mm (center pin positive “+”).
• Reverse polarity protection.
• Nixie Tubes Shiled NCS314-8C PCB size: 296mm x 53.26mm. (11.65 x 2.08 in)

  

Our Benefits:

• Easy to build beautiful clock – we also offer the case.
• Easy to customize firmware under Your own needs, thanks to an open platform – Arduino.
• Fast uploading via USB.
• The latest version of the firmware always available on GitHub.No need for additional drivers – we are use only Genuine USB to serial converters (FTDI). Drivers for them are pre-installed in all popular OS: Windows, MacOS, Linux.
• Human friendly menu.
• Very high qualty PCB.
• Japan aluminium capacitors.
• Complete Power On Self-Test (POST): LED backlight, tubes and sound. Unique circumstantial tube test.
• Competent Technical support.

 

IN-14 Shield NCS314-8C Principal Electrical Scheme:

IN-14 Arduino Shield NCS314-8C References:

 

NCS314-8C Shield Board 2D Render Top side with dimensions:

IN-14 Arduino Shield NCS314-8C Nixie Clock GRA & AFCH:









User Manual  

 

 

Dear customers!
If you have ANY questions, PLEASE ASK us

Shipping and Return information

All Items are shipped from Ukraine
Via International registered Airmail
Shipments are made within 1 business day
After the payments are received and verified
It takes about 4-7 days via UPS Express delivery
It takes about 10-18 days via Standard shipping
It takes about 35-45 days via Economy shipping
We combine multiple Items to save on shipping

UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zealand:5-7 daysAfrica, Central America:5-7 days

Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zealand:12-18 daysAfrica, Central America:12-18 days

Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zealand:45-55 daysAfrica, Central America:45-55 days

Return Policy

All Returns are accepted

• For Return you should contact Us within 14 Days after receiving the Item
• Refunds are made as Money back or Replacements (buyer’s choice)
• Return Shipments are paid by the buyer
• No restocking fees are charged